فروش رطوبت سنج SAMWON کره

Locked – a user can’t change a pre-set configuration
▶Press set key for longer than 5 seconds to save the configuration.
Note: Once locked, a user can’t change a pre-set configuration by pressing set key for
longer than 5 seconds. The unit must be unlocked before a user can change the pre-set
configuration.
② You can specify the range of temperature that a user can set.
▶Turn off the power. Turn on the power while pressing set key. Keep pressing set key
until you see StH on the display unit.
▶Press set key several times to select StL. Set the configuration as following using Up
and Dn keys.
Item Setting Description
StH 50.0 The highest value for high temperature is 50 degree. Factory Setting
StL 40.0 The lowest value for low temperature is 40 degree.
▶Press set key for longer than 5 seconds to save the configuration.
Note: After this configuration, the main temperature can be set only within the range of 40
to 50 degree.

① Set the auxiliary relay output to Alarm Output
▶The auxiliary relay selects either Alarm Output or Timer Output. Set the relay to Alarm
Output. (Alarm Output is factory default setting)
▶You MUST turn off the power to change the factory settings.
▶Turn on the power while pressing set key. And keep pressing the set key.
▶Release the set key when the display shows StH.
▶Press set key several times until you see tyP.
▶Set the configuration as following using Up and Dn keys
Item Setting Description Factory Setting
tyP H or C Use Auxiliary output as Alarm output
(C = Alarm High, H = Alarm Low)
▶Store the setting in memory by pressing the set key for longer than 5 seconds.
②How to set Alarm Output Temperature
▶When the display shows current temperature, press set key for longer than 5 seconds.
Release the set key when the display shows diF.
▶If Pro is not displayed, you have to the auxiliary output to Alarm Output. Refer to the
item 1) above.
▶Select Pro by pressing set key several times.
▶Set the configuration as following using Up and Dn keys
Item Setting Description User Setting
Pro 100.0 Alarm Output Temperature is set to 100 degree C.
▶Store the setting in memory by pressing the set key for longer than 5 seconds.
③ How to set Alarm High or Low
▶To change the factory setting, you MUST turn off the power.
▶Turn the power on while pressing set key. And keep pressing the set key.
▶Release the key when the you see StH in the display unit.
▶Select tyP by pressing set key several times.
▶Set the configuration as following using Up and Dn keys
than the alarm temperature
▶Press set key for longer than 5 seconds to save the configuration.
Item Setting Description
H The output is turn on when the current temperature
becomes lower
Factory
Setting
tyP
C The output is turn off when the current temperature
becomes higher than the alarm temperature
④ How to disable the alarm output
▶When you want to turn off alarm relay output, follow the procedure described below.
▶Press set key for longer than 5 seconds when the display shows a current temperature.
Release the key when you see diF.
▶Press set key several times to select Pro.
▶Select either the highest value or lowest value using Up or Dn key.
Item Setting Description User setting
Pro oFF This configuration disables the alarm output.
▶Press SET key for longer than 5 seconds to save the configuration.
① How to set the auxiliary relay to the timer output
▶The auxiliary relay selects either the alarm output or timer output. As a factory
setting, the relay is set to the alarm output.
▶To change the factory setting, you MUST turn off the power.
جهت خرید محصول با ما تماس بگیرید:
دفتر فروش تهران: بازرگانی تیکوا نیرو – آقای مقدم
تلفن های تماس:
33999115 – 33999719 -33113566